Friday, December 10, 2010

STA301 Mid Term Current Paper (Dec 2010)

STA301 Mid Term Current Paper (Dec 2010)

) find the probability when fair dice is thrown
make a sample space and find the sum that is equal to 10 
2) multiplication theorem of probability.
3) -1<r<1 find the relationship between these. page 123


Explain Y=a+bX in this equation what is meant by Y, a, b, X page116
Moment ratios find b1 question mujhe exactly yad nahi per b1 find krna tha page 114

Absolute and relative measure of dispersion. page 77



Current paper 

1. What is the PARTITION sample? 2 marks.
2. Find the skewness of data from the following: 3 marks.
Q1 = 0.011, Q2= 0.023, Q3= 0.033
another 3 marks question is about Pearson Coefficient of skewness.
one question from probability is of 5 marks and one from regression in which i have to find out Standard estimate of error is also of 5 marks.

Fin630 Mid Term Current Paper (Dec 2010)

Fin630 Mid Term Current Paper (Dec 2010)

18 MCQs 
(all were new mostly related with fundamental, technical analysis etc i think mostly from chapter 5 to 20)

5 subjective questions:

1. what is the difference between a load fund and non-load fund ? 3 marks
2. why P/E ratios tends to be high when interest rate and inflation is low? 3 marks
3. why the industry analysis is valuable? 5 marks
4. why there is a need of technical analysis when fundamental analysis study everything from the overall economy and industry condition to the financial condition and management of companies? 5 marks

5. State any 5 objectives of studying balance sheet in fundamental analysis. 5 marks

Another Paper:

Following are the descriptive questions of my today's FIN630 paper

1. What is meant by NAT (Net Asset Value)? (Marks 3)
2. Why P/E ratio tends to be high, when interest and inflation rates are low? (Marks 5)
3. State the five objectives of studying balance sheet in fundamental analysis? (Marks 5)
4. Keeping in view the business cycle, which type of industry is the most sensitive to economical changes? (Marks 5)
5. Determine how technical analysis is used in Dow theory? (Marks 3)


Another Paper:

Total question = 23 
MCQ =18 
2 question = 3 number 
3 question = 5 number 
Q#19 Describe the various sources of information available at the Library? 
(3) 
Q#20 Why it is diffecult to classify industry? (3) 
Q#21 Keeping in view the business cycle, describe which industries are most 
sensitive to changes in the economy? Give two examples (5) 
Q#22 Why there is a need of Technical analysis, When fundamental analysts 
study everything from the overall economy and industry conditions to the 
financial condition and management of componies? (5) 
Q#23 Investors should lower the rate of expected return in order to adjust 
for higher risk in common stock. Do you agree with this ststement? Justify 
your answer 

*Old* *papers main say koi mcq nahi aya. sab new thay*

HRM628 Mid Term Current Paper (Dec 2010)

HRM628 Mid Term Current Paper (Dec 2010)

MCQ;s 18

Shor Q 5

How would u describe the purpose of skill variety of design component at individual level of diagnosis (3 marks)
Discuss Apathetic client practitioner relationship style (3 marks)
What is diff b/w personal and relational refreezing (5 marks)
Alignment is the key property of open system, discuss (5 marks)
Discuss structure system as the design component of org (5 marks)

Another Paper:

1st Question was
What is difference between external and internal consultant at the stage of diagnosis? that caries 5 marks.
2. Discuss "Open systems in organizations" 3 mrks
3. what r basic stratge for OD? 5 mrks
4. Define Lewin's change model. 3 mrks

MCM301 Mid Term Current Paper (Dec 2010)

MCM301 Mid Term Current Paper (Dec 2010)

Aj ka paper (MCM301) ka kafi easy tha lekin mera bohat bora howa.

total Q 32
2 Q marks3
2 Q marks 5

aik Question ye tha

What is the factor causes of LISTINER BARRIORS? How to eliminate or reduced? marks 5

Mgt401 Mid Term Current Paper (Dec 2010)

Mgt401 Mid Term Current Paper (Dec 2010)

there were total or 18 multiple choice and 5 long questions.
1. about accounting of the total expenses and per unit cost, (data was provided) .........(5Marks)
2. About treatment of cash in hand and cash in bank in the balance sheet as per companies ordinance 1984.........(5marks)
3. that was bout the liabilities, data was given and asked for treatment .....5marks
4. an example;e of a company was given to solve.............3 marks
5. forgottthere were total or 18 multiple choice and 5 long questions.
1. about accounting of the total expenses and per unit cost, (data was provided) .........(5Marks)
2. About treatment of cash in hand and cash in bank in the balance sheet as per companies ordinance 1984.........(5marks)
3. that was bout the liabilities, data was given and asked for treatment .....5marks
4. an example;e of a company was given to solve.............3 marks
5. forgotten

Mgt402 Mid Term Current Paper (Dec 2010)

Mgt402 Mid Term Current Paper (Dec 2010) 

 

 

Which of the following best describe piece rate system?

       ► The increased volume of production results in decreased cost of production

       ► The increased volume of production in minimum time

       ► Establishment of fair standard rates

       ► Higher output is a result of efficient management

Which of the followin is NOT an assumption of the basic economic-order quantity model?

       ► Annual demand is known

       ► Orderin cost is known

       ► Carryin cost is known

       ► Quantity discounts are available

 All of the following are deducted from gross Profit to calculate Operating income EXCEPT:

       ► Selling expenses

       ► Advertising expenses

       ► Administrative expenses

       Financial expenses

The salary of factory clerk is treated as:

       ► Direct labor cost

       ► Indirect labor cost

       ► Conversion cost

       ► Prime cost

The components of the conversion cost are:

 

       ► Direct Material + Direct Labor + Other Direct Cost

       Direct Labor  + FOH

       ► Prime Cost + FOH+ Other Direct Cost

       ► Prime Cost + FOH

 In cost accounting, Avoidable loss is charged to which of the following?

        ► Factory over head control account

       ►                         Work in process control account

       ► Marketing overhead control account

       ► Administration overhead control account

 Which of the following functions are fulfilled by Goods Received Note?

i.      Provides information to update the inventory records on receipt of goods

ii.    Provides information to check the quantity on the supplier's invoice

iii.   Provides information to  check the price on the supplier's invoice

       ► (i) only

       ►             (i) and (ii) only

       ► (i) and (iii) only

       ► (ii) and (iii) only

Overhead absorption rate (OAR) can be calculated as:

        ► Direct labor cost /Direct Labor hours

       ►             Estimated FOH/ Direct Labor hours

       ► Prime cost/ Estimated FOH

       ► Prime cost/ Direct labor cost

 Which of the following would be considered as factory overhead using a job order cost system?

       ► Direct materials

       ► Direct labor

       Depreciation on factory buildings

       ► Salesperson's salary

       ► Salesperson's salary

 If, Basic Salary                      Rs.10,000

Per Piece commission Rs. 5

Unit sold                                 700 pieces

What will be the COMMISION?

       ► Rs. 3,500

       ► Rs. 13,500

       ► Rs. 10,000

       ► Rs. 6,500

 With reference to cost of production report, cost accounted for as follows is also known as: 

       Cost reconciliation

       ► Bank reconciliation

       ► Cash reconciliation

       ► Capital reconciliation

 Identify units transferred out with the help of given data:  

                   

 

Units

Units still in process    (100%material, 75% conversion )

4,000

Lost units

2,000

Units started in process

50,000

        ► 6,000 units

       ► 44,000 units

       ► 52,000 units

       ► 56,000 units

The difference over the period of time between actual and applied FOH will usually be minimal when the predetermined overhead rate is based on:

       ► Normal capacity

       ► Designed capacity

       ► Direct Labor hours

       ► Machine hours

The cost that is subject to actual payment or will be paid for in future is called:

        ► Fixed cost

       ► Step cost

       ► Explicit cost

       ► Imputed cost

Cost of material consumed under LIFO costing method is Rs. 6,000. Conversion Cost is Rs. 16,500. 1,000 units of the product were manufactured out of which 800 @ Rs. 30 units sold. There were no beginning and ending inventories of work in process and finished goods.

Required: Calculate per unit cost with the help of given information.

       ► Rs. 22.50   

     ► Rs.16.50

       ► Rs. 6.00

       ► Rs. 28.13

Calculate total salary received with the given data. 

Salary

Rs.5000

Per Piece commission               

10 % per piece 

Unit sold

700 pieces

Price per piece

 Rs. 10

        ► Rs. 5,100

       ► Rs. 5,000

       ► Rs. 5,600

       ► Rs. 5,700                                                     

Which cost accumulation procedure is best suited to a continuous mass production process of similar units?

       ► Job order costing

       ► Process costing

       ► Standard costing

       ► Actual costing

Which of the following method of inventory valuation is not recommended under IAS 02? 

       ► LIFO

       ► FIFO

       ► Weighted Average

       ► Both LIFO & FIFO

Which of the following are basic inventories for a manufacturing concern?                 

       ► Indirect materials, goods in process, and raw materials

       ► Finished goods, raw materials, and direct materials

       ► Raw materials, goods in process, and finished goods

       ► Raw materials, factory overhead, and direct labor

If the cost per equivalent unit is Rs. 1.60. The equivalent units of output are 50,000. The WIP closing stock is 10,000 units, 40% completed. What will be the value of closing stock?

       ► Rs. 9,600

       ► Rs. 80,000

       ► Rs. 16,000

       Rs. 6,400

Consider the following data:

Salary

Rs.5000

Per Piece commission               

10 % per piece 

Unit sold

700 pieces

Price per piece

 Rs. 10

Amount of commission received

?

 

       ► Rs. 100

       ► Rs. 500

       ► Rs. 600

       Rs. 700

 

Question No: 32    ( Marks: 1 )    - Please choose one

 Lost units (Normal loss)

500 units

Units received from preceding department

13,500 units

Units completed in this department

11,750 units

 

Required: Identify units still in process with the help of above data.

 

       1,250 units

       ► 14,000 units

       ► 12,250 units

       ► 1,750 units

 

The journal entry of Material purchase on credit under perpetual inventory system is:

 

 

 

       ► Inventory account (Dr) Material account (Cr)

       ► Account payable (Dr.) Purchases account (Cr)

       Inventory account (Dr) Account payable account (Cr)

       ► Purchases account (Dr) Accounts payable account (Cr)

A direct cost is identified by which of the following feature?

 

 

       ► Its behavior

       Its traceability

       ► Its controllability

       ► Its relevance

INCOME BEFORE INTEREST AND TEX

 

OTHER INCOME

OPERATING INCOME

GROSS PROFIT

 

Pay roll sheet include except

Gross income

Net income

Tax rebate

Statuary and non statuary

 

Inventory of Rs. 96,000 was purchased during the year. The cost of goods sold was Rs. 90,000 and the ending inventory was Rs. 18,000. What was the inventory turnover ratio for the year?

       ► 5.0 times

       ► 5.3 times

       ► 6.0 times

       ► 6.4 times

 

Discuss the advantages and disadvantages of the group bonus scheme?

Write the formula of abortion and discuss it base?

EQUILENT   production material, lab. FOH (CALUCLATION WALA THAA)

 

PRIME COST (CALUCLATION WALA THAA)

Mgt601 Mid Term Current Paper (Dec 2010)

Mgt601 Mid Term Current Paper (Dec 2010)

my today's ppr sme

total questions 23
5 descriptive
cash inflow and cash outflow with examples
about externalities negative and positive point
new buiness need what sources of iformation
why does entrepreneur need buisness plan before start new biz

Mgt603 Mid Term Current Paper (Dec 2010)

Mgt603 Mid Term Current Paper (Dec 2010)

my paper was too tough
Suppose according to the IFE matrix, the weighted score of a certain company is 3.20. How that company will interpret this score in terms of its internal factors 

baq sb question exmple k sath thy 
or smjh se bahair


Another Paper:\

My Today paper of Strategic Management 

Q. Define focus strateies what are the rules and guidelines to adpot focus strategy? 
Q. Define market peneteration Give an example of local or multinational company? 
Q. In the CPM is 
A=2.50 
B=1.50 
C=3.50 
interpret and campare with each other A, B and C. 
Q. aur ek continue working conditions k hawaly se tha bhool gya??

Mgt613 Mid Term Current Paper (Dec 2010)

Mgt613 Mid Term Current Paper (Dec 2010)

My Today Paper. 

Q. Automation of a production setting requires the use of robots. How do you agree with the statement? 
Q. Write down the chracteristics of a Well Designed service system? 
Q. From the following date of ABC Comapny determines the efficeincy and utilization? 
Designed capacity = 60 unit/day 
Effective capacity= 45 unit/day 
Actual Capacity =39 unit/day 
Q. ABC Co. planned to purchase a new machine Total fixed cost Rs. 15000 , variable cost per unit Rs.5. Revenue per unit Rs. 7. Determine the Breakeven point. 
(b) if the cost increase by 10% and revenue decrease by 10% then what will be the break even point all the things are same?

Mkt501 Mid Term Current Paper (Dec 2010)

Mkt501 Mid Term Current Paper (Dec 2010)
today paper of mine
28mcq's two Q of 5marks & two of 3marks

how good brand name added valu of company products? 3
Explain how Marketers can prolong the lives of many products in the maturity or
decline stages of the PLC? Also how can they move those products back to their
growth stage? 3

The first step in the product development process is generation of ideas. Discuss
what are the internal and external sources of ideas? Why external sources are
considered to be the more important than internal source? 5
types of discount? 5

mcq's almost from past papers..

CS402 Mid Term Current Paper (Dec 2010)

CS402 Mid Term Current Paper (Dec 2010)

difference in star plus and kleene star closure?
what id palndrome?
mealy machine?
NFA 2 FA?

CS201 Mid Term Current Paper (Dec 2010)

CS201 Mid Term Current Paper (Dec 2010)

objective from past papers... subjective questions which i remem were like:

Q: multi dimensional array of 2 rows. assign first index of both rows '2'
Q: print the diagonal elements of a n-dimensional matrix

CS610 Mid Term Current Paper (Dec 2010)

CS610 Mid Term Current Paper (Dec 2010)

- Difference b/w static and dynamic routing
- Define Switched multi megabit data service (SMDS)
- Store and forward technology?
- (I do not remember the exact statement of this question, but the concept was like this) Can different segments of network be connected to form a bridge cycle. If yes, how?
- How does a bridge builds up routing table (again not sure about the exact statement of question, but concept was this)
- Difference b/w cells and packets?

Another Paper:
20mcqs (mostly from past papers)

1) what is LAN and WAN. (2)
2) what is VIRTUAL CHANNEL AND CIRCUIT (3)
3) physical hosting of WAN (5)
4) What are default routes, draw the table (3)
5) GIve a comparision of wiring Schemes.
6) Compare connection oriented and connectionless Service. (5)

CS609 Mid Term Current Paper (Dec 2010)

CS609 Mid Term Current Paper (Dec 2010)
Q (5 marks)
Explain the usage of XON and XOFF is software based flow control
Ans (Page # 158 , lec # 17)


Write a function that will read the status of COM Port and return the modem line status is a unsigned int. COM port number will be passed as parameter.


Q Write down the purpose of int 12H and int 15H/88H
Ans : int 12H : used for memory interface 
int 15H/88H return = No. of kb above 1 MB


Q
Write down the detail of the Service (00,01,02) of int 17H which is used in printer.

Ans : 00 : Display characters
01 : Initialze Printer
02 : Request printer.



some questions of Another Paper.

Q (2 Marks )
write stands for
THR 
RBR
DLL
DLM 



write stands for.

DSR 
DTR
RTS
CTS

CS615 Mid Term Current Paper (Dec 2010)

CS615 Mid Term Current Paper (Dec 2010)

1. Describe the concept of information description (2)
2. write the steps of product evaluation (2)
3.write 6 methods of requirement elicition. (3)
4. execution process tasks(3)
5. What is the difference between interim version and baseline versions (5)
6. What is the difference between data gathering data usage guidlines (5)


Project management processes can be organized into _____________ groups 
► Four
► Five
► Six
► Seven

Finally, the specification includes a ________ 
► Bibliography
► Appendix
► Both Bibliography and Appendix
► Reference 
Requirements are refined and analyzed to assess their clarity, completeness, and_______ 
► Correctness
► Consistency
► Concurrency
► None of given
A software project that meets all the stated objectives is a success of _________ 

► Project quality
► Project fundamental purpose 
► Project management myth
► Project requirement

Another Paper:

1. Quality Fuction Deployment (5)
2. Formal Technical Review (5)
3. Configuration Control Tools(2)
4. Attributes of Software Design (2)
5. SQA activities. (3)

Fin622 Mid Term Current Paper (Dec 2010)

Fin622 Mid Term Current Paper (Dec 2010)

Question No: 1 ( Marks: 1 ) - Please choose one
Which of the following statements is TRUE regarding Profitability Index?
► It ignores time value of money
► It ignores future cash flows
► It ignores the scale of investment
► It ignores return on investment
Question No: 2 ( Marks: 1 ) - Please choose one
The employment of fixed costs associated with the actual production of goods or services is known as:
► Financial leverage
► Volume discounting
► Operating leverage
► Covariance
Question No: 3 ( Marks: 1 ) - Please choose one
Which of the following statements is CORRECT regarding the fundamental analysis?
► Fundamental analysts use only Economic indicators to evaluate a stock
► Fundamental analysts use only financial information to evaluate a company's stocks
► Fundamental analysts use financial and non-financial information to evaluate a company's stocks
► Fundamental analysts use only non-financial information to evaluate a company's stocks
Question No: 4 ( Marks: 1 ) - Please choose one
ABC Corporation declared 10% dividend on its shares. A person purchased some shares of this corporation after the dividend was announced. If he is entitled to receive the declared dividend, his shares would be categorized as which of the following?

► Ex-Dividend
► Cum-Dividend
► Stock- Dividend
► Cash Dividend
Question No: 5 ( Marks: 1 ) - Please choose one
Which of the following firms would have the highest financial leverage?

► A firm having debt-to-equity ratio of 30:70
► A firm having debt-to-equity ratio of 40:60
► A firm having debt-to-equity ratio of 50:50
► A firm having debt-to-equity ratio of 60:40
Question No: 6 ( Marks: 1 ) - Please choose one
Which of the following types of bonds pays no annual interest to the holder, but is sold at discount below the par value?
► An original maturity bond
► A floating rate bond
► A fixed maturity date bond
► A zero coupon bond
Question No: 7 ( Marks: 1 ) - Please choose one
What will be the effect of reduction in the cost of capital on the accounting break-even level of revenues?

► It raises the break-even level
► It reduces the break-even level. 
► It has no effect on the break-even level.
► This cannot be determined without knowing the length of the investment horizon.

Question No: 8 ( Marks: 1 ) - Please choose one
Which of the following risks increases as the debt level of a business increases?

► Financial risk 
► Operating risk
► Business risk
► Investment risk
Quiz no.9
Which of the following is a transaction of a primary financial market?

 Initial Public Offering 
► Buying Mutual Funds Certificates
► Selling old shares
► Buying Bonds issued in previous years
Question No: 10 (Marks: 1) - Please choose one
A firm had an interest expense of Rs.400,000 on its outstanding debt during the financial year 2006-2007. If the firm marginal tax rate is 40%, what was the total tax savings of the firm during the period 2006-2007?

► Rs.150, 000
► Rs.160, 000
► Rs.170, 000
► Rs.180, 000
Question No: 11 (Marks: 1) - Please choose one
Which of the following are the primary sources of capital to the firm?

► Net income, Retained earnings and Bank loans
► Bonds, Preferred stock and Common stock
► Operating profits, extraordinary gains and Dividends
► Amortization cash flow, Net income and Retained earnings
Question No: 12 (Marks: 1) - Please choose one
Which one of the following costs should be ignored while evaluating the financial viability of a project?

► Initial cost
► Equipment cost
► Cost of capital
► Sunk cost
Fin622 Mid Term Current Paper (Dec 2010)

Q 1.Why the weighted average cost of capital of levered firm is lesser than the un-levered firm? Briefly describe. Marks 3

Q 2.What is the difference between systematic and unsystematic risk? Marks 3

Q 3.Compare and contrast the Stable Dividend per share policy and Constant dividend payout policy. Marks 5

Q 4.How does the probability analysis evaluate the financial feasibility of a project? Marks 5


(note; the answers of MCQ's are in bold form)

Another Paper:
total quiz=32
MCQs =28
2 question =3 numbers
2 question = 5 number

Q suppose we have two stocks i.e. stock A and stock B.stock A has beta of 1.5 and stock B has a beta of 0.75.The expected rate of return on average stock is 13% and the risk free rate of return is 7%.By how much does the required rate on the riskier stock exceeds the required return on the less risky stock. (5)

Q Why weighted average cost of capital of a levered firm is lesser than that of an Un-levered firm? Explain briefly? (3)

Another Paper:

Total Question: 32
MCQs: 28 each of 1 mark
Descriptive: 4
Question # 28 (3 marks)
soft capital rationing and hard capital rationing
Question # 29 (3 marks)
wacc is lesser of levered firm than un-levered firm? why?
Question # 30 (5 marks)
have to find Variance of the require rate return
Question # 31 (5 marks)
pure play

Another:

FIN622 -- Fall 2010 Papers (Latest)
MCQs = 28
Subjective Questions = 4
65% MCQs and Subjective from old papers.
1) Systemic and unsystematic risk(3 M)
2) Capital ratio for investment (5)
3) Levered and un levered for firm (3)
4) Dividend policy and types.(5)

Another:

MCQs = 28
Subjective Questions = 4
1) Difference b/w simple payback period and discount period?
2) Difference b/w economic break even point and accounting break even point.
3) Equity and capital of firm?

Another
why market value of cost of debt and equity used in WACC instead of book value? Determinate market value of cost of debt and equity? (5)
What is the influence of inflation on the rate of return in CAPM?
Face Value = 1020, time period = 15 years, after 1 year bond value increases to 1050. Coupon payment = Rs.80
Calculate rate of return of bond?

Another Paper:

A public limited Company had sales of Rs.2 million this year. The marketing manager expects sales to grow at a 10 percent compound annual rate over the next 10 years. On this basis, which of the following is the closest amount of sales in 10 years?

Suppose you invest Rs.400,000 in treasury bills and Rs.600,000 in the market portfolio. What is the return on your portfolio if bills yield 6% and the expected return on the market is 14%? What does the return on this portfolio imply for the expected return on individual stocks with betas of 0.6?
Stocks A and B has the following historical returns:

Year StockA,s Returns (rA) StockB,s Returns (rB)
2003 -18.00% -14.50%
2004 33 21.8
2005 15 30.5
2006 -0.5 -7.6
2007 27 26.3

Assume that a person held a portfolio consisting of 50% of Stock A and 50% of Stock B. What would have been the realized rate of return on the portfolio in each year from 2003 to 2007? What would have been the average return on the portfolio during this period?

Does the value of firm increase when it increases its proportion of debt financing?
How high market interest rates leads to capital rationing? Explain briefly.